China pvc pipe manufacturer, custom pvc pipes wholesaler--Tonglu Valves Manufactring

Contact Us

E-mail:
sales@valve-exporter.com

Set up in 1995, Tonglu Valves Manufactring Co.,Ltd. is one of the leading China pvc pipe manufacturer and supplier in Yongjia County of Zhejiang Province. We manufacture all products strictly conforming to the API, JIS, ANSI, BS, GB, NF and DIN standards. Our oem pvc pipes are available to users on request and are used for municipal works, petroleum, chemical industry, power station, metallurgy, national defense, and scientific research fields.

> Works in your home, it requires only a small space
> Eliminate your power bill by 50% or even completely
> Works in all conditions
> Material needed is cheap and easily
> Simplify the process with easy-to-follow steps.

PVC is the most commonly used plastic material for manufacturing plastic pipe. It has a relatively high tensile strength and modulus of elasticity, and therefore, is stronger and more rigid than most other thermoplastics. Joining methods are by solvent cementing, threading (Schedule 80 only) or flanging. PVC has been used successfully in such areas as chemical processing, industrial plating, chilled water distribution, salt water, chemical drainage, and irrigation systems. Pressure ratings given are for solvent cemented systems. When adding valves, flanges or other components, the system must be derated to the rating of the lowest component: threaded fittings are rated at 50% of solvent cement systems; flanged fittings are rated at 150 psi; union fittings are rated at 235 psi. See manufacturers' recommendations for other ratings.

All Lipson pipes (extrusions) are produced from high-precision German made extrusion lines for high quality consistency and superior product finishing.
Our pipes and fittings can be made, according and conforming to the following International Standards:
1) American Standard (Sch 40 & Sch 80) SDR 21, 26, 41
2) British Standard (BS 3505, 5255, 4515, EN 1452, EN 1401)
3) Singaporean Standard (SS141, 272, 213)
4) Australian Standard (AS/NZS 1477, 1415, 1260, 1254)
5) Japanese standard (JIS K 6742, JIS K 6741, JIS K 6743, JIS K 6739)
6) National standard (GB 10002, GB 5836, GB 14823, GB 13664)
7) International standard (ISO 4422, ISO 3633, IEC 614, GY 3050)
All Lipson PVC Pipes and fittings are approved and certified by the National Quality Supervision Testing Centre of Plastic Products.
1.Protect and guide communication cable;
2.Good pressure-resistance and ageing-resistance;
3.Complete standards,varied combinations;
4.New structure,save space;
5.Good toughness,free curvature;
6.Work conveniently,saving the time and amount of work;
7.High utilization ratio,low total cost of manufacturing;
8.Material:PVC;
9.Spec(unit:mm):
H x W: 66.6 x 71.2
R: 32
D: 2.0
d: 1.6
L: 6,000
10.Packing:Customized