flow valve manufacturer, flow valves distributor, flow valve factory--China Deland Valves Manufactring

Set up in 1995, China Deland Valves Manufactring Co.,Ltd. is one of the leading flow valve manufacturer, supplier and distributor in Yongjia County of Zhejiang Province. We manufacture all flow valves strictly conforming to the API, JIS, ANSI, BS, GB, NF and DIN standards. Our flow valves are available to users on request and are used for municipal works, petroleum, chemical industry, power station, metallurgy, national defense, and scientific research fields. We can supply custom, used, discount, cheap flow valve and accessory to USA, UK, Canda, Amercia, Europe, Germany, France, Japan, India, Iran, Russia, Poland and more than 30 countries in the world.

Flow control allows for precise adjustment of water flow after installation
Manual internal/external bleed; encapsulated solenoid
Popular "jar-top" system for fast and easy servicing
For new or replacement installations
Works with any other brand irrigation systems
Built to take the pressure, the Toro 1-inch In-Line Jar-Top Valve operates in the widest flow and pressure ranges from 0.25 to 30 GPM (gallons per minute) and 10 to 150 PSI (pounds per square inch). The popular threaded bonnet "jar top" system makes servicing fast and easy. The Toro 1-inch In-Line Jar-Top Valve includes Flow Control and External Bleed features. Flow control makes it possible to fine-tune the amount of water pressure going to each individual zone, reducing misting and fogging at the sprinkler and saving water. External bleed is the best mechanism to flush out dirt from the supply and lateral lines during new installations or repairs. Any debris passes through the valve rather than becoming stuck in the valve. The valve includes a high quality 24-volt AC solenoid, with 18-inch lead wires, for automatic operation and easy installation. (1-inch female thread inlet and outlet) Note: Check with city or local code compliance office to determine whether or not there are restrictions on the types of valves that can be used in your area. In-line valves may or may not require a separate anti-siphon/backflow prevention device.
1", Female Thread, In Line Valve With Flow Control, Manual Flow Control For Easy Water Flow Adjustment, Manual External Bleed, Stainless Steel Metering Pin Reduces Wear.

1) Modern structure, beautiful configuration and zero leakage2) Double - flow - volume setup (big and small), high discharge accuracy3) Four connection modes available: flange, outer - thread, flange - outer - thread and inner - thread4) Anti - explosion function for computerized dispensers.5) Metric parameter: 20mm6) Metric pressure: 0.35MPa7) Flow rate: 0 - 60L/min8) Rated voltage: VAC 220VInner packing: Dimensions: 135 x 120 x 80mm Weight: 0.7kg Outer packing: Dimensions: 155 x 140 x 100mm Weight: 1kg
Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-16 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A.