China brake valve manufacturer, custom brake valves wholesaler--Tonglu Valves Manufactring

Contact Us

E-mail:
sales@valve-exporter.com

Set up in 1995, Tonglu Valves Manufactring Co.,Ltd. is one of the leading China brake valve manufacturer and supplier in Yongjia County of Zhejiang Province. We manufacture all products strictly conforming to the API, JIS, ANSI, BS, GB, NF and DIN standards. Our oem brake valves are available to users on request and are used for municipal works, petroleum, chemical industry, power station, metallurgy, national defense, and scientific research fields.

> Works in your home, it requires only a small space
> Eliminate your power bill by 50% or even completely
> Works in all conditions
> Material needed is cheap and easily
> Simplify the process with easy-to-follow steps.

Proportioning Valve Depressor for ABS Brake Systems Proper service procedure requires that a proportioning valve depressor be installed on the 4WAL unit when pressure bleeding the brake system. For best results on 4WAL, use two of these depressors, one for each valve. Services a wide variety of General Motors utility vehicles, vans, and pickups with Kelsey Hayes anti-lock brake systems. Also works on RWAL systems and must be installed on the proportioning valve (only one depressor required). This tool supersedes Kent Moore No. J-35856. Wt., 4 oz. Same as Kent-Moore No. J-39177. This is basically the " brake" in the air braking system. Mounted below the foot of the driver, supplies air to the front and back brake chambers.
Has a inbuilt safety system which cuts of the primary or the secondary system in case of a failure, so that atleast one circuit is operational. Specifications for operating oil: equivalent to SAE～10W. Operating oil temperature range: 10～80℃. Can be used for spring return type retracts, spring return pneumatic cylinders. By switching the control mode of the valve it can be used as a proportional brake control.

Made For Peterbilt - Stainless Steel!Fits 2001 & NewerRide in S T Y L E !Stainless Steel Will Improve The Look Of Your Truck & Last For A Very Long Time!It's Time To Replace Your Old Plates - Do It Today! Get Item Details!Brand New -- Never Used!!! It comes complete with handwheel, and as with all our products, it is ready to install. To install, drill a 7/8" diameter hole in the tender bottom in the front end of the water leg (or wherever you may choose to place the valve) and match drill and tap 6 clearance holes for 8-32 screws (not included). The valve is then inserted from the bottom. No more having to remove the top to remove and/or service the valve. When ordering, you must specify the outside distance between the bottom and the top as these valves are custom made upon order to suit your requirements. The valve uses a fluted shuttle seating against an o-ring seat. Outlet connection is 5/16" tube silver solder union. Boiler end is 1/8” pipe. The direct-link actuator is of small size, high intensity, high precision, light weight and convenient installation and maintenance. The actuator is of low friction, high efficiency, strong thrust and high safety performance.